Filter
Top Products
PSR-E303/YPT-300 Owner’s Manual 29
Backup and Initialization
Backup
Some internal parameters will revert to their default values if not saved
before the power is turned off.
In order to backup these parameters press and hold the [FUNCTION] but-
ton for longer than a second.
* The User Songs are automatically backed up when recording is completed,
ensuring that the data is not deleted even when you fail to backup.
Initialization
This function erases all backup data in the instrument’s flash memory and
restores the initial default settings. The following initialization procedures
are provided.
To clear data backed up to the internal flash memory (described above),
turn the power on by pressing the [STANDBY/ON] switch while holding
the highest white key on the keyboard. The backed up data will be erased
and the default values restored.
To clear Song data that has been transferred to the internal flash memory
from a computer, simultaneously hold down the highest white key and the
three highest black keys on the keyboard and turn the power on by pressing
the [STANDBY/ON] switch.
● Parameters that are saved in backup:
• User Songs*
• Touch Response on/off setting
• The following Function settings: Tuning, Split Point, Touch
Sensitivity, Style Volume, Song Volume, Metronome
Volume, Demo Cancel, Panel Sustain
Hold for longer than a second.
Backup Clear
• When you execute the
Backup Clear operation,
backup parameters will
be cleared. You can save
the backup parameters
(containing the five User
Songs) by using Music-
soft Downloader to trans-
fer them to a computer.
Refer to the section
“Transferring a user file
from the PSR-E303/YPT-
300 to a computer” on
page 63.
CAUTION
Flash Clear
• When you execute the
Flash Clear operation,
Song data you have pur-
chased and downloaded
will also be cleared. Make
sure to save your impor-
tant data by transferring
to a computer using
Musicsoft Downloader
(page 63).
CAUTION