Filter
Top Products
PSR-3000/1500 Owner’s Manual
17
Introduction
Powering Up
n
Before you switch your PSR-3000/1500 on or off, first turn down the volume of any connected audio
equipment.
1 Press the [STANDBY/ON] switch.
The main display appears in the display.
When you’re ready to turn off the power, press the [STANDBY/ON]
switch again.
Both the display and the drive lamp (at the bottom left of the drive) will turn
off.
2 Setting the volume
Use the [MASTER VOLUME] dial to adjust the volume to an appropriate
level.
CAUTION
In order to avoid possible
damage to the speakers or
other connected electronic
equipment, always switch on
the power of the PSR-3000/
1500 before switching on the
power of the amplified speak-
ers or mixer and amplifier.
Likewise, always switch off
the power of the PSR-3000/
1500 after switching off the
power of the amplified speak-
ers or mixer and amplifier.
STANDBY
ON
STYLE CONTROL
DIRECT
ACCESS
CHANNEL
ON OFF
BALANCE
A
B
C
D
E
F
TAB
G
H
I
J
87654321
MIXING
PART
CONSOLE
EXIT
PART
PHONES