Filter
Top Products
12 PSR-E203/YPT-200 Owner’s Manual
— Quick Guide —
Step
1
Changing the Voices
When turning the power on, bars appear at the left side in the display to
indicate the value of the master volume.
When you first turn on the power, make sure to turn down the volume
of the instrument by pressing the MASTER VOLUME [-] button sev-
eral times. While playing the keyboard, adjust the volume level by
using the MASTER VOLUME [+] and [-] buttons.
When the power is turned on, the initial value is automatically set to 12
(indicated by six bars in the display).
If you are using the instrument in a quiet place and want a lower vol-
ume setting to start with, simultaneously hold down the MASTER
VOLUME [-] button and turn on the power with the [STANDBY/ON]
switch. This automatically sets the value to 4 (indicated by two bars).
Turn the power on and adjust the volume
Turning the power on
Press the [STANDBY/ON] switch
to turn on the power.
Press the [STANDBY/ON] switch
again to turn the power off.
Adjusting the volume
The volume increases as indicated by the bars
in the display.
GrandPno
001
001
• The value of master volume
cannot be saved.
NOTE
Press the [+] button to
increase the volume.
Press the [-] button to
lower the volume.