Filter
Top Products
RS500/RS700 Owner’s Manual 5
5. Loosen the bolts of the tom holders and rotate the three tom holders into the positions shown in Figure 3. Then,
retighten the bolts.
6. Loosen the bolts securing the drum trigger module clamp in place, position the clamp with its flat surface facing
upward, and then retighten the bolts.
CAUTION
• Take special care when handling the tom holders in order to avoid injuring yourself with their sharp ends.
For information about the next steps such as assembling Yamaha Electronic Drum Set, refer to
“Assembly Manual” in the Pad Set.
Specifications
External dimensions: 1346 (W) x 766.3 (D) x 835 (H) mm (Standard Assembly) Weight: 10 kg
* Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corp. reserves the right to
change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be
the same in every locale, please check with your Yamaha dealer.
[Figure 3: Example of standard assembly]
Tom holder
Bolts
Left leg
Right leg
Drum trigger
module clamp
Right pillar
Left pillar
Tom holder
Bolts
Bolts
Bolts
Bolts
Bolts
Bolts
5
5
5
5
5
6
6
rs500_700_en_1224.fm Page 5 Friday, December 24, 2010 9:15 AM