Filter
Top Products
10
End Pin
End Pin Stopper
■ About the End Pin
Loosen the end pin stopper, extend the end
pin to a comfortable length for playing and
firmly tighten the end pin stopper.
•Make sure the end pin stopper is secured firmly to
prevent the instrument from falling while you play.
Tighten
Loosen
■ Putting the Bass into the Optional Soft Case
Before putting the bass into the optional Silent Bass soft case, remove the frame unit from
the Silent Bass and pack the components into the case as shown in the diagram below.
• Use the Velcro® fasteners (2 locations) inside the case to secure the frame unit in place.
•When putting the bow in the soft case, make sure that it is first put into the hard bow case, then place the
hard case in the pocket and secure with a Velcro® fastener (1 location).
•When the case is placed on its side with the instrument packed inside, make sure that the side holding
the main unit is placed on the bottom (so the side with the frame is on top).
The soft case does not fully protect parts such as the bridge from damage.
The soft case is meant for storing and transportation of the instrument and protects it from dust, etc. Do
not place the bridge so it is on the bottom of the case and do not cause damage to the instrument by
placing objects on top of the case, hitting it, etc.
Frame Unit
Velcro® Fasteners
Bow Pocket
Hard Bow Case
Silent Bass Main Unit
08.7.11, 3:51 PMPage 10