Filter
Top Products
31
P-80
F6
Metronome Volume
The volume of the metronome sound can be changed. After selecting “F6”, use the [–/NO▼] and
[+/YES▲] buttons to set the metronome volume as required. The volume range is from 1 through 20.
A setting of “1” produces minimum sound, while a setting of “20” produces maximum metronome
volume. Press the [–/NO▼] and [+/YES▲] buttons simultaneously to recall the default setting “10”.
This function sets the volume at which a “canceled” part is played during preset song playback
(see page 14 for information on the “preset song part cancel” function). Use the [–/NO▼] and [+/
YES▲] buttons to set the volume as required. The volume range is from 0 through 20. A setting of
“0” produces no sound, while a setting of “20” produces maximum volume. Press the [–/NO▼] and
[+/YES▲] buttons simultaneously to recall the default setting “5”.
Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play
along with. Set to “0” if you don’t want to hear the part.
■ SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-
TION] button while holding the METRONOME [START/STOP] button.
F7
Preset Song Part Cancel Volume
The Function Mode
29