Yamaha YPP-50 Musical Instrument User Manual


 
TROUBLESHOOTING
MIDI DATA FORMAT
If you encounter what appears to be a malfunction, please check
the following points before assuming that your Personal Elec-
tronic Piano is faulty.
1. No Sound When the Power is Turned ON
Is the AC plug properly connected to an AC wall outlet?
Check the AC connection carefully. Is the MASTER VOLUME
control turned up to a reasonable listening level?
2. The Personal Electronic Piano Reproduces Radio or TV
Sound
This can occur if there is a high-power transmitter in your
vicinity. Contact your Yamaha dealer.
3. Intermittent Static Noise
This is usually due to turning ON or OFF a household appli-
ance or other electronic equipment which is fed by the same
AC mains line as your Personal Electronic Piano.
4. Interference Appears On Radio or TV Sets Located Near
the Personal Electronic Piano
The Personal Electronic Piano contains digital circuitry which
can generate radio-frequency noise. The solution is to move
the Personal Electronic Piano further away from the affected
equipment, or vice versa.
5. Distorted Sound When the Personal Electronic Piano is Con-
nected to An External Amplifier/Speaker System
If the Personal Electronic Piano is connected to a stereo
system or instrument amplifier and the sound is distorted,
reduce the setting of the Personal Electronic Piano volume
control to a level at which the distortion ceases.
OPTIONS & EXPANDER MODULES
OPTIONS
BC-7 Bench
A stable, comfortable bench styled to match your Yamaha
Personal Electronic Piano.
HPEd Stereo Headphones
High-performance lightweight dynamic headphones with extra-
soft ear pads.
PCS-3 Connecting Cord
For connecting the Personal Electronic Piano to a stereo system
or other audio equipment.
EXPANDER MODULES
Sound Box EMT-10
.........................
AWM Sound Expander
Sound Box EMT-1
............................
FM Sound Expander
Memory Box EMQ-1
........................
Disk Recorder
Drum Box EMR-1
..............................
Digital Drummer
Reverb Box EME-1
...........................
Digital Reverb
These state-of-the-art Expander Modules can dramatically expand
the musical scope of your Personal Electronic Piano.
NOTE: Some items may not be available in certain areas.
If you’re already very familiar with MIDI, or are using a com-
puter to control your music hardware with computer-generated
MIDI messages, the data provided in this section can help you
to control the Personal Electronic Piano.
1. NOTE ON/OFF
Data format: [9nH]–›[kk]–›[vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (28~103=E
0
~ G
6)
vv = Velocity (Key ON = 1~127. Key OFF= 0)
* Note OFF event format [8nH]–›[kk] also recognized (reception
only).
2. CONTROL CHANGE & MODE MESSAGES
Data format: [BnH]–›[cc]–›[dd]
BnH = Control event (n = channel number)
cc = Control number (or mode message number)
dd = Control value
cc
07H
0BH
40H
43H
79H
PARAMETER
Volume
0=OFF; 6FH=-3dB; 7FH=0dB
dd
Expression
0=OFF; 6FH=-3dB; 7FH=0dB
Damper pedal
0~3FH=OFF; 40H~7FH=ON
Soft pedal
0~3FH=OFF; 40H~7FH=ON
Reset all controllers
0
7AH
Local ON/OFF
0=OFF; 7FH=ON
7BH All notes OFF
7CH OMNI OFF/All
0
0
notes OFF
7DH OMNI ON/All
0
notes OFF
* 43H, 79H, 7AH, 7BH, 7CH and 7DH are receive only.
3.
PROGRAM CHANGE
Data format: [CnH]–›[dd]
CnH = program event (n = channel number)
dd = Program number
dd
00H
VOICE
dd
VOICE
PIANO
08H PIANO + BASS
0lH E.PIANO
09H
E.PIANO + BASS
02H HARPSI 0AH
HARPS1 + BASS
03H VIBES
0BH VIBES + BASS
04H BRASS
0CH BRASS + BASS
05H STRINGS
0DH STRINGS + BASS
06H
07H
P.ORGAN
0EH P.ORGAN + BASS
BASS
* No voice change is made when dd>0EH.
4.
SYSTEM REALTIME MESSAGES
Active Sensing (FEH)
Transmitted every 200 milliseconds. If not received for more than 400
milliseconds a NOTE OFF occurs.
5.
SYSTEM EXCLUSIVE MESSAGES
Data format:
[F0H]–›[43H]–›[xn]–›[ff]..................... [F7H]
x=0, ff=7CH: Panel data dump. Panel data follows 7CH.
x=2, ff=7CH: Panel data request transmission.
Data format:
[F0H]–›[43H]–›[73H]–›[20H]–›[nn]–›[F7H]
43H = YAMAHA ID
73H = SINGLE KEYBOARD ID
20H = YPP-50 ID
nn = 40H: Performance play ON (receive only)
nn = 41H: Performance play OFF (receive only)
nn = 50H: Tempo UP
nn = 51H: Tempo DOWN
nn = 52H: Tempo 120
6.
MULTI TIMBRE MODE
Data format:
[F0H]–›[43H]–›[73H]–›[id]–›[nn]–›[F7H]
43H = YAMAHA ID
73H = SINGLE KEYBOARD ID
id=0lH (Standard), 1BH (Clavinova), or 20H (YPP-50)
nn=15H: MULTI TIMBRE mode ON; nn=13H: MULTI TIMBRE
mode OFF; nn=7nH: Receive channel change (n = channel number.
Receive only).
* All MIDI data available for general use are given above.
13