A SERVICE OF

logo

Voice Over IP 15
T0008-48/B Revision 5.2
Configuring VoIP
Route Selection Table Parameters
Parameters These Route Selection Table parameters should be configured:
Note
A table boot is required for changes to these parameters to take affect.
Entry Number
Range 1 to 16
Default 1
Description Specifies the number used to reference this table record.
Address
Range 0 to 15 digits
Default blank
Description Specifies the network address for calls routed beyond this node.
Destination #1
Range 0 to 32 alphanumeric characters. Use space to blank the field.
Default blank
Description Specifies the destination to which calls are routed. Enter SoTCP.