Wireless Features
• Standards Compliant. The Wireless Broadband Router
complies with the IEEE802.11g (DSSS) specifications for
Wireless LANs.
•
Supports Pre-N Wireless Stations. The 802.11n Draft
standard provides for backward compatibility with the 802.11b
standard, so 802.11n, 802.11b and 802.11g Wireless stations
can be used simultaneously.
•
Speeds to 300Mbps. All speeds up to the 802.11g maximum
of 300Mbps are supported.
•
WEP support. Support for WEP (Wired Equivalent Privacy) is
included. Key sizes of 64 Bit and 128 Bit are supported. WEP
encrypts any data before transmission, providing protection
against snoopers.
•
WPA-PSK (WPA2-PSK) support. Like WEP, WPA-PSK
encrypts any data before transmission, providing protection
against snoopers. The WPA-PSK is a later standard than WEP,
and provides both easier configuration and greater security than
WEP.
•
Wireless MAC Access Control. The Wireless Access
Control feature can check the MAC address (hardware address)
of Wireless stations to ensure that only trusted Wireless Stations
can access your LAN.
•
Simple Configuration. If the default settings are unsuitable,
they can be changed quickly and easily.
•
WPS Support. WPS (Wi-Fi Protected Setup) allows
consumers to protect their home networks by using the push
button configuration (PBC) on the router, or entering an 8-digit
PIN code if there's no button.
LAN Features
• 4-Port Switching Hub. The Wireless Broadband Router
incorporates a 4-port 10/100BaseT switching hub, making it easy
to create or extend your LAN.
•
DHCP Server Support. Dynamic Host Configuration Protocol
provides a dynamic IP address to PCs and other devices upon
3
