A SERVICE OF

logo

6
Before powering up the unit:
1) Make sure the PHONO / LINE switches at the top are set to match the hookups in the back.
2) Set all EQ faders to the middlePlace both WET/DRY faders in the DRY position.
3) In the MAIN section, set the MASTER to MIN and the BALANCE in the middle.
4) Set both CH1 and CH2 faders to the bottom position
5) Make sure the Amplifier or powered speaker is set to MIN volume or off.
6) Make sure the MIC1, MIC2, and PHONES GAIN are all set to – or MIN.