Asus DSBV-D Manual

A SERVICE OF

next previous

5-4 Chapter 5: RAID conguration

Menu Description

Congure Allows you to create RAID 0 or RAID 1 set using the Easy

Conguration or the New Conguration command. This menu

also allows you to view, add, or clear RAID congurations or

select the boot drive

Initialize Allows you to initialize the logical drives of a created RAID set

Objects Allows you to initialize logical drives or change the logical drive

parameters

Rebuild Allows you to rebuild failed drives

Check Consistency Allows you to check the data consistency of the logical drives of

a created RAID set

5.2.1 Creating a RAID 0 or RAID 1 set

The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0

or RAID 1 set using two types of congurations: Easy and New.

In Easy Conguration, the logical drive parameters are set automatically including

the size and stripe size (RAID 1 only).

In New Conguration, you manually set the logical drive parameters and assign the

set size and stripe size (RAID 1 only).

Using Easy Conguration

To create a RAID set using the Easy Conguration option:

1. From the utility main menu, highlight Congure, then press <Enter>.

2. Use the arrow keys to select Easy Conguration, then press <Enter>.