A SERVICE OF

logo

TO DRAIN OIL
Raise drain bowl to desired height and lock in place with tension adjusting knob (12#). With valve (8#) fully open
(Valve handle in vertical position), drain oil into bowl/tank assembly. DO NOT fill the reservoir above the
maximum oil level as shown.
TO EVACUATE OIL
Evacuate used oil from tank when maximum oil level is obtained. Raise drain bowl and lock in place. Close the
ball valve (8#) fully by turning it to horizontal position. Place hose and nozzle (#27) SECURELY into your used oil
collection reservoir and open the ball valve (26#) by turning it to vertical position. Connect air supply to air inlet
connector (#33) and discharge oil.
Never leave unit unattended when evacuating oil.
Immediately disconnect air supply when oil is no longer discharging into reservoir.