TO TRANSPORT TANK
With ball valve (#8) fully open (valve handle in vertical position), lower drain bowl to desired height.
Always use the tank handle to transport the tank assembly. Always grasp the handle with two hands while moving
the load. Do not pull unit by the funnel, tube or hoses.
CLEANING AND MAINTENANCE
1. Before each use, examine the general condition of the entire oil drain system. Inspect air hoses for damage.
Check for loose screws, misalignment, binding of moving parts, improper mounting, broken parts and any
other condition that may affect its safe operation. If abnormal noise or vibration occurs, turn off the air
compressor immediately and have the problem corrected before further use. Refer to “Warnings and
precautions sections. DO NOT use a damaged product.
2. CAUTION: Always disconnect this product from its air supply, and release all compressed air from the system
before performing any cleaning, servicing maintenance.
3. Keep the outside of the equipment free of oil grease. Use only a mild soap and damp cloth when cleaning.
DO NOT use a flammable or combustible solvent.
4. Before and during each use, inspect the oil indicator level. DO NOT fill tank above maximum oil level.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY A CERTIFIED AND LICENSED
TECHNICIAN AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
