User Guide P. 27
c) By turning the key to the ON position and pressing the valet switch (if included) until the
parking lights flash 5 times.
Panic Mode will automatically shut down after 30 sec.
The AUX 1 / 2
nd
Unlock
(Both AUX 1 and AUX 2 can be programmed for Priority Door Access.)This great feature allows
the user to unlock
solely the driver’s door with a single press of the UNLOCK button on the
transmitter, and to unlock the other doors, if desired, by pressing the
UNLOCK button for a second
time.
The output will provide a 1-second negative output when the
UNLOCK button is pressed a second
time on the transmitter. This can be used not only as priority door access, but also as trunk
release.
¾ Horn Confirmation:
AUX 1 can be programmed to trigger the horn every time the LOCK button is pressed, or when the
LOCK button is pressed twice within 3 seconds. When horn confirmation is activated, panic mode is
enabled. If horn confirmation is disabled, panic mode will not be available.
The AUX 2 Timed Output
This 500 mA negative AUX 2 output can be used for many different applications. It can be
programmed for priority door access if
AUX 1 is programmed for horn confirmation. For additional
information, please refer to the “3-pin Harness” section earlier in this Guide.
The AUX 3 / Trunk or Sunroof Output
This 500 mA negative AUX 3 output can be used for many different applications. The output can be
programmed to give a 1-second pulse when the
TRUNK button is pressed (if the ignition is OFF or
during a remote start), or to give a continuous output as long as the
TRUNK button is held down (for
sunroof or window control).
If the Option 3 is selected, a disarm pulse will be sent before the trunk is popped. An arm pulse will
be sent 4 seconds later. This option is overridden when the Zone 3 option is used as a trunk pin
(Menu 3, Feature 5, Option 1).
Programmable External Trigger
For additional information, please refer to the “12-pin Accessories Harness” section earlier in this
Guide.
Multi-Level Features (default state)
The multi-level features allow the user to access different features of the vehicle or of a second car
by pressing the
AUX button once, twice or three times. By default, the multi-level features are
programmed as follows:
Basic features (press the AUX button 1X)
AUX ¾ LOCK:.................................................................aux 2
AUX ¾ TRUNK:..............................................................status request
AUX ¾ START/STOP ......................................................cold weather
Multi-car operation (press the AUX button 2X)
AUX ¾ AUX ¾ LOCK:.............................2
nd
car lock
AUX ¾ AUX ¾ UNLOCK:.........................2
nd
car unlock
AUX ¾ AUX ¾ START/STOP:..................2
nd
car start/stop
AUX ¾ AUX ¾ TRUNK:...........................2
nd
car trunk
Customized features (press the AUX button 3X)
(May not be applicable for certain vehicles)
You can add customized features such as turning on the radio, opening sliding doors, etc.
