A SERVICE OF

logo

Open as PDF
next previous
SERVSWITCH PANTHER
20
20
4.10 Serial port
The Serial port is used for upgrading the firmware. Serial port On means the upgrade
program can be used.
To change the Serial port setting:
1. Navigate to the Serial port line.
2. Toggle between the options using the Space bar.
4.11 Changing the Keyboard language
The keyboard is preset to US English, this can be changed to French (FR) or German
(DE), as follows:
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Space bar.
4.12 Editing the Switch name
You can substitute up to 18 characters in the line. A space constitutes a character.
When there is more than one switch in the system give each Switch’s OSD a different
name.
4.13 F7 Defaults
Press F7 to return the OSD to the factory default settings.
Note
All changes made will be removed.