A SERVICE OF

logo

20 10/100 Managed Hub
meters for 10Mbps connections. All ports are hot pluggable. It is recom-
mended you label each cable to identify the device or port at each end.
Connecting Devices
Connecting Workstations
Install either a 10BASE-T or a 100BASE-TX Fast Ethernet Network
Interface Card into each workstation if not already installed. Using a
UTP/STP cable, connect the Ethernet card (in the workstation) to a hub
port.
Connecting Ethernet Hubs or Devices
Connect 10Mbps devices using UTP/STP Cat 3, 4 or 5 cables with RJ-45
connectors, enabling sending/receiving to or from other 10Mbps devices.
By default, each port is set in auto sensing mode. The 10/100 Managed
Hub can detect a 10BASE-T device and transmit/receive information
to/from it.
MDI-II MDI-II
1x 2x 3x 4x 5x 6x 9x8x7x 10x 11x 12x
13x 14x 15x 16x 17x 18x 21x20x19x 22x 23x 24x
10/100 Managed Hub
Switch Module
Installed
Shared Ports
Shared Ports
Connecting Ethernet Hubs
10Mbps
10/100 Managed Hub