A SERVICE OF

logo

Open as PDF
next previous
Preparing the RAS for configuration 32
Model LRA2900A RAS Getting Started Guide 3 • Configuring the RAS for operation
Figure 15. Login window
5. Type superuser as the default username and password, then press <RETURN>. The Top Level Man-
agement window displays (see figure 16).
Figure 16. VT-100 Top Level Management window
6. Select option f Ethernet.
7. Select a PrimaryIpAddress to set the Ethernet IP address.
8. Type the IP address at the > prompt, then press <RETURN>.
9. Use the left arrow key to return to the previous menu.
10. Select b PrimaryIpMask to set the Ethernet IP subnet mask.
11. Type the IP netmask at the > prompt, then press <RETURN>.
The RAS is now prepared for configuration using a Web browser.