3 • Configuring the RAS for operation Model LRA2900A RAS Getting Started Guide
33 Configuring the RAS with a Web browser
Note The default gateway has not been configured at this time. You can
access the web pages with a PC located on the same network as the
RAS or you must configure the default gateway using HyperTermi-
nal. Select i IP then 2 Default Gateway.
Configuring the RAS with a Web browser
This section describes configuring the following:
• User authentication
• Dial-in user configuration
• Default gateway
Opening the RAS Web Administration Pages
Do the following:
1. Connect the RAS to the LAN.
2. Start a Web browser session and go to the URL:
http://<the.ras.ip.address>
where the <the.ras.ip.address> is the IP address of the RAS entered in Step 8.
3. When the username and password window displays, type superuser as the username and password,
then press <RETURN>. The Administration Pages
Home window appears (see figure 17).
