38 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC Series 550 Camera
F.01U.239.454 | 3.0 | 2012.09 User Manual Bosch Security Systems, Inc.
Communication Setup Menu Choices:
7.6 Alarm Setup
The Alarm Setup Menu contains alarm inputs, outputs and rules.
Menu Description Submenu / Description Default
Setting
Exit Saves and exits the menu.
AutoBaud Turns on AutoBaud detection,
which detects and adjusts the
camera protocol and baud rate
to match that of the controller.
Toggles ON or OFF.
ON automatically accepts baud
rates from 2400 to 57600.
(Note: If stepping from 2400 to
57600 baud, you must first set
the Baud Rate to 19200 for
AutoBaud to detect the higher
baud rate.)
ON
Baud Rate Manually sets the baud rate
when AutoBaud is set to OFF.
Choices are 2400, 4800, 9600,
19200, 38400, and 57600.
9600
Bilinx Turns on Bilinx control
communication.
(Only available when not
connected to a Bilinx data
interface unit.)
Toggles ON or OFF.ON
Restore Defaults Restores the default settings for
this menu only.
NOTICE!
The maximum number of Alarm Inputs is eight (8), available only on the Alarm and Washer
Pump Drive Card (MIC-ALM) (sold separately). This card is available for non-IR power supply
units (PSUs) only. Without the MIC-ALM installed in the MIC PSU, only one alarm input is
available on non-IR PSUs. IR PSUs have 4 alarm inputs available. See Section 5.6.2 Alarm
Inputs and Outputs, page 22 for the specific number of alarm Inputs and Outputs per PSU.
Alarm Setup Inputs Setup
Exit... Exit...
Inputs Setup... 1. Alarm Input 1 N.O.
Outputs Setup... 2. Alarm Input 2 N.O.
Rule Setup... 3. Alarm Input 3 N.O.
Restore Defaults... 4. Alarm Input 4 N.O.
5. Alarm Input 5 N.O.
6. Alarm Input 6 N.O.
7. Alarm Input 7 N.O.
8. Alarm Input 8 N.O.
9. NONE
10. NONE
11. NONE
12. NONE
Focus / Iris: Select Type
Focus / Iris: Select Right / Left: Select Mode
