64 en | MIC Series 550 Camera
F.01U.239.454 | 3.0 | 2012.09 User Manual Bosch Security Systems, Inc.
210 Digital Zoom Enable Enables the camera to continue into the digital zoom
once the optical limit has been reached, as long as
Digital Zoom is enabled under the MIC Setup tab.
215 Auto Home to Pattern With Auto Home turned on, the camera can be
configured to move to play pattern tour 1 using the
"Home To" setting. The amount of time before this
takes place can be set to 30 seconds, 1 minute, 5
minutes, or 1 hour using the "Home Time" Setting in
"Advanced Controls."
217 Auto Flip On
218 Auto Flip Off Turns off the Autoflip function.
219 Wash Wipe Enable Upon activation, the camera moves to the Wash Wipe
Position, which should be set to look at the washer
nozzle, starts the washer pump, and turns on the
wiper. Once released, the unit returns to its original
position, stops the washer pump, and continues wiping
for a few seconds. This process occurs only if the Wash
Wipe command is turned on; otherwise, the camera
activates the washer pump but will not move. If you
want to use an external washer, then you should
purchase either the MIC-WKT (washer nozzle and
bracket and MIC-WSH card) or the MIC-WKT-IR
(washer nozzle and bracket) to enable a third party
washer pump to be installed.
220 Wash Wipe Disable Disables the Wash Wipe function.
232 Privacy: Replace All Replaces all masks.
233 Privacy: Uncover All Uncovers all masks.
251 Recalibrate Camera Module Enables/disables the preset to recalibrate the camera.
255 Load Factury Defaults Resets settings, including presets
Preset
Number
Command Description
