A SERVICE OF

logo

Open as PDF
next previous
10 en | Installing the Recessed Camera Mount Flush Mount Ceiling Kit
F.01U.126.944 | 1.0 | 2009.04 Mounting Guide Bosch Security Systems, Inc.
18. Attach one end of the safety tether to the hook on the
Mounting Plate and the other end to the hook on the
Camera Module/Base.
Figure 2.7 Attach safety tether
19. Reattach the Camera Module/Base to the Mounting Plate.
20. Push against the underside of the FlexiDome to push the
unit and the bracket up into the ceiling.
21. Adjust the focus of the camera to your desired view. Refer
to the FlexiDome IP Operation Manual for focusing
instructions.
22. Attach the FlexiDome inner liner to the Camera Module/
Base. Then, place the FlexiDome Trim Ring and Dome over
the Camera Module and tighten the three tamper-resistant
screws.
7 Safety tether
8 Camera Module/Base