AutoDome Junior HD Troubleshooting | en 183
Bosch Security Systems, Inc. Installation Manual F.01U.275.803 | 6.0 | 2012.11
Problem Solution
No Network
Connection
– Check all network connections
– Ensure that the maximum distance
between any two Ethernet connections is
100 m (328 ft) or less.
If O.K., then:
– If you are behind a firewall, ensure that the
Video Transmission mode is set to UDP.
a. Access the Settings Web page for the IP-
enabled device.
b. Expand the Service Settings link, then
click Network.
c. Select UDP from the Video Transmission
drop-down list. Then click Set.
Video is distorted
(AutoDome Junior HD)
– Navigate to the SETTINGS page.
– Click the Advanced Link; then click the Camera
link, located in the left pane of the Settings
window.
– Click the Installer Menu, located under the
Camera link.
– Select either 50 or 60 Hz from the Frequency
pull-down list.
