Before Using the Machine
1-20
Telephone Line Setting
Telephone Line Setting
Set the type of telephone line that is connected to the machine.
If this setting is incorrect, you will be unable to send faxes. Be sure to check the type of
telephone line that you are using, and make the correct setting.
The default setting is <Tone>.
Connect the telephone line cable before turning ON the machine, if you use the automatic detection mode.
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
3
Use [▼], [▲] or (Scroll Wheel) to select
<Communications Settings>, then press
[OK].
4
Use [▼], [▲] or (Scroll Wheel) to select
<Fax Settings>, then press [OK].
5
Use [▼], [▲] or (Scroll Wheel) to select
<User Settings>, then press [OK].
