A SERVICE OF

logo

23
6 Press [IP Address Settings].
7 Press [IP Address], then enter the IP address
using - (Numeric Keys).
If you specify an IP address using DHCP, BOOTP, or RARP,
press [DHCP], [BOOTP], or [RARP]. One of the DHCP, BOOTP,
or RARP settings can be selected at any one time.
8 Press [Subnet Mask] and [Gateway Address] and
specify the settings in the same way.
9 Press [OK].
10 Press the main power switch on the right side
of the machine to ā€œ ā€ side, wait at least 10
seconds, and then press the main power
switch to ā€œIā€ side.