*1 Photos are optimized for printing using the Photo optimizer pro function.
*2 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
Trimming Default (Off: No trimming), On (follow the camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see
PictBridge print settings
.
1.
Select Setup on the HOME screen.
Note
For details on how to select a menu on the HOME screen, refer to
Overview of the
Machine
.
2.
Select Device settings, then press the
OK
button.
3.
Use the button to select PictBridge print settings, then press the
OK
button.
4.
Check the message that is displayed, then press the OK button.
The PictBridge print settings screen is displayed.
Page top
Page 734 of 941 pagesAbout PictBridge Print Settings
