Page 4SKU 94681
For technical questions, please call 1-800-444-3353.
When servicing this product, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of electric shock or injury.
SPECIFIC SAFETY RULES
WARNING! Do not exceed the maximum PSI capacity of each Hydraulic Ram in
this Kit. Also, do not operate a Ram beyond its maximum range of travel. Exceeding
the maximum PSI and travel capacity of a Ram can cause personal injury and/or
property damage.
IMPORTANT! Refer to the “Product Specifications” Table on page 2 of this
manual to determine the maximum PSI and range of travel for each Hydraulic Ram
included in this Kit.
Prior to using the Auto Body/Frame Repair Kit, make sure to read
and understand all instructions and safety precautions as outlined
in the auto manufacturer’s manual. Make sure the Auto Body/Frame
Repair Kit is fully compatible with each specific vehicle. It is beyond the
scope of this manual to discuss body/frame repair guidelines, and instead is the
responsibility of the product user to consult a body/frame repair technical manual
for full instructions.
Maintain labels and nameplates on the Auto Body/Frame Repair Kit. These
carry important information. If unreadable or missing, contact Harbor Freight Tools
for a replacement.
Use the right product for the job. There are certain applications for which this
product was designed. Do not use this product for a purpose for which it was not
intended. Never use this item to raise or move a vehicle.
Stay clear of an Hydraulic Ram when using the tool. Position your body as far
away from the Ram as is practical when the Ram is under a load. It is possible
for a Ram to slip under a load, possibly resulting in serious injury and/or property
damage.
Industrial applications must follow OSHA requirements.
Before working on a vehicle, always set the parking brake and block the tires.
Never attempt a repair while the engine is running or the vehicle is moving.
Avoid off-center loads. If the Hydraulic Pump (not included) unit seems unusu-
ally hard to pump, immediately stop the operation. Adjust the Hydraulic Ram unit
to eliminate or diminish an off-center load.
2.
1.
2.
3.
4.
5.
6.
7.
8.
