A SERVICE OF

logo

Open as PDF
next previous
F-9
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Appendix F Cisco Unified IP Phone Non-Lockable Wall Mount
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones
Figure F-8 Figure 23: Tab location
To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.
Before You Begin
You require 2 screwdrivers or metal rods.
Step 1 Push the screw drivers into the left and right holes in the phone mounting plate approximately 1 in. (2.5
cm).
Step 2 Lift the screwdriver handles up to put a downward pressure on the tabs.
345752