Electro-Voice R300 Manual

A SERVICE OF

next previous

19

2.3.1 | Bodypack Transmitter Setup & Operation

1. Insert Batteries

  a.Openthebatterycompartmentbypressinginonthelatchandslidingthedoordown.

  b.InserttwoAAbatterieswith+and–asindicated.

  c.Closethebatterydoorbypushingup.

2.Turntheunitonbypressingandholdingtheon/offbuttonfor3seconds,andtheLCDdisplaywilllightup.

Ifchannelhasnotbeenset,setchannelaccordingto2.1.

3. Microphone/Guitar Operation.

  a.ForLapelMicrophonesthegainswitchshouldbeintheLAVposition.

  b.ForHeadwornMicrophonesandGuitaroperationthegainswitchshouldbeintheINSposition.

  c.Iflapelmicrophonesaretoosensitiveandtheaudiometeronthereceiverisreachingthepeak,

putthegainswitchinINStolowerthegain.

4. Mute Function–pressandholdon/offbuttonfor2secondsuntilMUTEappearsintheLCDDisplay,

betweentheChannelandFrequency.TheLEDabovethedisplaywillturnredandthesoundismuted.

Repeattoturnmuteoff.