8
FLUSH MOUNTING INSTALLATION (NOT RECOMMENDED)
6
A
K
D
B
E
C
F
J
G
G
M
N
HH
IL
WARNING!
We do not recommend flush mounting and sealing as
servicing requires the cooktop to be removed from the
benchtop. The owner carries all risk for flush mounting
the cooktop. The owner must ensure the cooktop has
been cut out from the benchtop before servicing can
be carried out. Fisher & Paykel will not be liable for any
costs associated with removing or replacing a flush-
mounted and/or sealed-in product, nor for repairing
any damage that may be incurred by doing this.
Product and cabinetry dimensions (mm)
CG302D
CG451D
CG603D
CG604D
CG752D
CG903D
CG905D
A
overall height of product (excluding burners, dials and pan supports) 64 64 64 64 64 64 64
B
overall width of product 300 450 600 600 750 900 900
C
overall depth of product 530 530 530 530 450 450 530
D
height of chassis (below top of bench) 64 64 64 64 64 64 64
E
width of chassis 256 406 555 555 706 856 856
F
depth of chassis 486 486 486 486 406 406 486
G
overall width of routered recess 305 455 605 605 755 905 905
G
I
width of cutout 265 415 560 560 715 865 865
H
overall depth of routered recess 535 535 535 535 455 455 535
H
I
depth of cutout 490 490 490 490 410 410 490
I
corner radius of cutout max. 10 max. 10 max. 10 max. 10 max. 10 max. 10 max. 10
J
distance from top of bench to centre of gas inlet on product 35 35 35 35 35 35 35
K
distance from edge of chassis to gas inlet on product 21 21 21 21 21 21 21
L
corner radius of routered recess max. 2 max. 2 max. 2 max. 2 max. 2 max. 2 max. 2
M
height of routered recess 5555555
N
minimum clearance below top of benchtop to:
combustible surface
Fisher & Paykel oven or nearest non-combustible surface
75
70
75
70
75
70
75
70
75
70
75
70
75
70
Note: Gas inlet connection is
located in the rear right corner.
TOP
TOP
REAR SIDE
FRONT
