Note
If the is operating
and a power failure occurs, it
will stop. The
may be unable to be opened
during this time. When the
power supply is resumed, the
will restart in the
same part of the wash program.
Lock Button (optional)
The Lock button activates/ deactivates the
Keylock or the Childlock functions.
Keylock
The Keylock function disables all the buttons on the
. To activate, press and hold the
LOCK button until you hear one beep (3 seconds).
Childlock
The Childlock feature locks the and
disables all the buttons. To activate, press and hold
the LOCK button until you hear two beeps (5
seconds).
To cancel Keylock or Childlock, press and hold the
LOCK button until you hear one beep and the Lock
symbol disappears from the electronic display.
5
Check
Ensure the drain filter is flush
with filter plate and the spray
arm can rotate about the center
easily.
Start
Close the . Press
the START/PAUSE button
to initiate the wash program.
This button also functions as the
Delay Start.
Pause
To pause the
during its wash cycle, press the
START/PAUSE button and wait for
three beeps before opening.
Restart by pressing the
START/PAUSE button. Forcing the
drawer open while in mid cycle
may cause damage or injury.
Finish
The will beep six
times to indicate the end of the
wash program. At the end of the
wash program the drying fan will
continue to run for a set time or
until the drawer is opened. The
fan assists with drying and uses
negligible amounts of energy. It
is normal for some water to
remain in the drain filter area
after the wash program is
complete.
To cancel Delay Start, press the POWER button or
hold the START/PAUSE button until the “delay”
symbol disappears.
DELAY START MODE (optional)
The start of the wash program can be delayed from 1 to 12 hours.
To activate Delay Start:
1. Press and hold the START/PAUSE button until the delay symbol
appears on the Electronic Display.
2. Continue until the desired delay time has been reached.
3. The will start once the delay time has elapsed and
the drawer is closed.
6 8
7
