GPSMAP
®
4000/5000 Series Owner’s Manual 33
Navigation
• Select . Select .
• Select . Select .
• Select . Select .
Marking and Navigating to an MOB Location
When you mark a waypoint, you can designate it as a man-overboard (MOB) location.
From any screen, select > .
An international MOB symbol marks the active MOB point and the chartplotter sets a course back to the
marked location using the Go To feature.
Viewing a List of all Waypoints
From the Home screen, select > > .
Editing a Saved Waypoint
1. From the Home screen, select > > .
2. Select a waypoint.
3. Select > .
4. Select an option:
• Select . Select .
• Select . Select a new symbol.
• Select . Select .
• Select . Select .
• Select . Select .
Creating a New Waypoint from the Waypoints List
1. From the Home screen, select > > > .
2. Complete an action:
• Select to create a new waypoint by entering grid coordinates.
• Select to select a new waypoint on the chart.
• Select to create a new waypoint at your present location.
Moving a Saved Waypoint
1. From the Home screen, select > > .
2. Select a waypoint.
3. Select > .
4. Indicate a new location for the waypoint:
• Select to move the waypoint while viewing a chart. Select .
• Select to move the waypoint using coordinates. Select .
Deleting a Waypoint or an MOB
You can delete a waypoint or an MOB that has been saved.
1. From the Home screen, select > > .
2. Select a waypoint or an MOB.
3. Select > .
Deleting All Waypoints
From the Home screen, select > > >>.
Copying Waypoints
See “Chartplotter Data Management” (page 60).
Routes
You can create and save up to 20 routes. Each route can contain up to 250 waypoints.
