50 GPSMAP
®
4000/5000 Series Owner’s Manual
Almanac, Environmental, and On-boat Data
Resetting Trip Gauges
1. From the Home screen, select > .
2. Complete an action:
• Select to set all the readings for the current trip to 0.0.
• Select to set the maximum speed reading to 0.0.
• Select to set the odometer reading to 0.0.
• Select to set all the readings to 0.0.
Viewing Video
The chartplotter can show video if you are connected to one or more video sources using the supplied video
cable. See the GPSMAP 4000/5000 Series Installation Instructions for details.
From the Home screen, select > .
Selecting a Video Source
1. From the Home screen, select > > .
2. Select .
3. Select or to indicate the source of the video feed and display video input.
Conguring the Video Appearance
Before you can congure the video appearance, you must set the video Source setting to Video 1 or Video 2
(page 50).
1. From the Home screen, select > > .
2. Complete an action:
• Select> to show the video using a stretched aspect ratio. The video cannot be stretched
beyond the dimensions provided by the connected video device, and it may not ll the entire screen.
• Select > to show the video using a standard aspect ratio.
• Select . Select , , or.
• Select to adjust the color saturation. Select , , or.
• Select . Select , , or.
• Select . Select the source format of the video ( or ). Select to allow the
chartplotter to select the source format automatically.
Alternating Among Multiple Video Sources
If you have two or more video sources, you can alternate between them using a specic time interval.
1. From the Home screen, select > > > > .
2. Select the amount of time each video appears.
