GPSMAP 400/500 Series Owner’s Manual 39
Viewing Information
5. Select the gauge limit.
6. Repeat steps 4 and 5 to set additional gauge limits.
Activating Status Alarms for Engine Gauges
If you have activated gauge status alarms, when the engine sends
a warning status message over the NMEA 2000 network, a gauge
status alarm message appears. The gauge face or bar may become
red depending on the alarm type.
From the Home screen, select Information > Dashboard >
Engine > MENU > Gauge Setup > Status Alarms > On.
To Customize Engine Gauge Status Alarms:
1. From the Home screen, select Information > Dashboard >
Engine > MENU > Gauge Setup > Status Alarms > Custom.
2. Select one or more engine gauge alarms that you want to turn on
or off.
3. Select Back.
Selecting the Number of Engines Shown in
Gauges
The engine gauges can show information for up to four engines.
1. From the Home screen, select Information > Dashboard >
Engine > MENU > Gauge Setup > Engine Selection > Num.
Engines.
2. Select the number of engines.
3. Select Back.
To select the engines for which information appears in the gauges,
select Edit Engines and complete steps 2 through 5 of “Selecting
the Engines Shown in Gauges” (following section).
Selecting the Engines Shown in Gauges
You must manually select the number of engines shown in the
engine gauges (see above) before you can select the engines for
which information appears in the gauges.
1. From the Home screen, select Information > Dashboard >
Engine > MENU > Gauge Setup > Engine Selection > Edit
Engines.
2. Select First Engine.
3. Select the number of the engine for which you want to view
information in the rst gauge or bar.
For example, if you select “3,” the rst engine bar shows
information for the engine identied as “Engine3” on the NMEA
2000 network.
4. Repeat step 3 for the second, third, and fourth engine bar, as
needed.
5. Select Back.
