9 - AUX PAGES
174
190-00357-00 Rev H
Utility Page
To transfer flight plans or user waypoints to/from a
second 500W-Series (or 400W-Series) unit:
1. While viewing the default Nav page, Flight Plan
Catalog, Active Flight Plan page, User Waypoint
page,
or the User Waypoint page by pressing
MENU, scrolling down to “Crossfill” with the
large right knob and then pressing ENT. On
the Aux Flight Planning page scroll down to
“Crossfill” with the large right knob, and then
press ENT.
2. Turn the large right knob to highlight the
Method field. Turn the small right knob to
select “Auto” or “Manual”. “Auto” automati-
cally transfers any selection of (or any change
to) a direct-to destination or active flight
plan, including VNAV parameters, to a second
500W/400W-Series Garmin unit.
3. The flashing cursor highlights the transfer data
option (TRANSFER) field. Turn the small right
knob to display a window of available data
options:
Turn the small right knob to display a list
of TRANSFER options. Continue turning the
small right knob to select the desired option.
• Active Flight Plan — transfers the active
flight plan, including VNAV parameters, to/
from a second 500W-Series (or 400W-Series)
Garmin unit in a dual unit installation. This
option is the default when selecting “Crossfill”
from the default Nav Page. Active Flight
Plan information is automatically transferred
between units when the “Auto” method is
selected above.
• Flight Plan — transfers any stored flight plan
to/from a second 500W-Series (or 400W-
Series) unit, by selecting the flight plan by
number. This option is the default when
selecting “Crossfill” from the Flight Plan Cata-
log.
•
User Waypoints (all) — transfers all stored
user waypoints to/from a second 500W/400W-
Series unit.
• User Waypoint — transfers the specified
user waypoint to a second 500W/400W-Series
unit.
4. Continue turning the small right knob to
highlight the desired data option. Press ENT
select the highlighted option.
