GPSMAP 3005C Owner’s Manual 21
BASIC OPERATION > NAVIGATING TO A DESTINATION
Saving a Track Log
You must save a track log before you can use the Follow Track feature. You can
store up to 15 track logs from certain times and dates.
To save a track log:
1. Press and hold ADJ/MENU to open the Main Menu.
2. Use the ROCKER to highlight the Tracks tab, and then highlight the
Active sub tab.
3. Press the Save soft key, and press ENTER. The Save Back Through
window appears.
4. Highlight the time or date of the track you want to save, or highlight Entire
Log, and press ENTER. The track begins saving, and then the Saved
Track Page appears. The default name, distance, number of points (700
maximum), and a map overview are shown.
5. To change the name of the saved track, highlight the Name field and press
ENTER, make any changes, and press ENTER again.
6. To specify the color used to show the saved track line on the map and
highway, highlight the Color field and press ENTER, choose a color, and
press ENTER again.
7. To show the track on the Map and Highway Pages, highlight the check box
to the left of Show on map and highway, and press ENTER.
8. Press the OK soft key to save the track log.
To review and edit a track:
1. On the Saved sub tab, highlight a track and press ENTER to open the
Saved Track Page.
2. Make any changes, and then press QUIT.
Default
track name
Total
distance
Total
number of
points
Color of
track line
Initiating a Follow Track
You must save a track before using the Follow Track option. If there are no saved
tracks, the message “There are no Saved Tracks to follow” appears.
To follow a track using the NAV key:
1. Press NAV, highlight Follow Track, and press ENTER. The Select Track
Page appears.
2. Highlight the track you want to follow, and press ENTER.
3. To invert the Follow Track (navigate it in the reverse direction), press NAV,
highlight Invert Route, and press ENTER.
To start a TracBack using the NAV key:
1. Press NAV to open the Navigation menu.
2. Highlight TracBack, and press ENTER. The TracBack Through window
appears.
3. Highlight the time, date, or Entire Log, and press ENTER.
