A SERVICE OF

logo

53
Replacing the CMOS battery
www.gateway.com
8 Place the edge of a small flat-head screwdriver under the battery and lift
the battery up until it comes out of the socket.
9 Make sure that the positive (+) side of the new battery is facing up, then
press the new battery into the socket until it snaps into place.
10 Follow the instructions in “Closing the server case” on page 28.
11 Turn on the server.
12 Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
13 Restore any BIOS settings that you wrote down in Step 4.
14 Save all your settings and close the BIOS Setup utility.