A SERVICE OF

logo

ENWW Loading media 23
Loading media
To load tray 1 or tray 2
1 If you are loading tray 1, raise the output tray and pull tray 1 out of the printer by grasping
under the front of the tray 1.
If you are loading tray 2, pull out tray 2 and raise its cover.
2 If you are loading A3 or larger sized media, extend the tray by pressing the tray extension
lock near the front of the tray and pulling both ends of the tray in opposite directions until it
is fully extended.
Tray 1
3 Press the button of the media width guide and slide the guide to the left. Press the button
of the media length guide and slide the guide towards you.