A SERVICE OF

logo

6-72 Removing and Replacing Parts
EN
Power Inlet Assembly
1 Remove the Top Cover (page 6-12) and the Right Side Cover
(page 6-23).
2 Remove the Switch Rod by flexing it slightly and unhooking it
from the switches on each end.
3 Remove the three self-tapping screws (B) from the Power Inlet
housing.
4 Remove the machine screw (A) and grounding wire.
Figure 6-61 Power Inlet Assembly (right side view of printer)
Item Explanation
A
Grounding Wire Screw
B
Screws