A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 26
b.
Release the hard drive tray, slide it forward until it locks, and then press hard drive carrier 1
down to access hard drive 2.
c. Remove hard drive 2.
To replace the component, reverse the removal procedure.
DIMM baffle
CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles
in the proper location after adding or replacing DIMMs. DIMM baffles that are missing or
installed incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).