A SERVICE OF

logo

Open as PDF
next previous
Optical drive option
To install the component:
1. Power down the server (on page 13).
2. Remove the server from the rack (on page 13).
3. Remove the access panel (on page 14).
4. Remove the air baffle (on page 14).
5. Remove the 9.5-mm optical drive blank. Retain the blank for future use.
6. Install the 9.5-mm optical drive assembly. When fully inserted, the assembly locking latch clicks.
7. Using a T-15 screwdriver, secure the drive to the chassis.
Hardware options installation 31