Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in Hibernation, turn the computer on,
and
then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the front panel
toward you.
b. Slide and hold the battery release latch 1 to the left. (The
front edge of the battery pack disengages from the
notebook.)
c. Lift the front edge of the battery pack up and swing it
back
2.
d. Remove the battery pack.
Spare Part Number Information
Battery packs
12-cell, 8.8-AHr
6-cell, 4.4-AHr
367760-001
367759-001
