A SERVICE OF

logo

5–56 Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
Optical drive (Section 5.7)
Switch cover (Section 5.8)
Keyboard (Section 5.9)
Display assembly (Section 5.10)
Base enclosoure (Section 5.11)
USB/S-Video controller board (Section 5.12)
Speaker assembly (Section 5.13)
2. Turn the top cover right side up with the front panel
toward
you.
3. Release the ZIF connector 1 to which the TouchPad cable is
connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable