A SERVICE OF

logo

Open as PDF
next previous
6-16 Replace Ink Filters
5. Position the new filter into the retaining strap.
The filter’s label has an arrow that indicates the direction of
flow. Install the filter with the arrow pointing up.
6. Connect the hoses to the top and bottom of the filter, and
tighten the connectors.
7. Secure the filter to the retaining strap with a zip tie.
8. Close the endcap cabinet door, or replace the access panel.
9. On the Front Page screen, press the Tools key.
10. Press Maintenance.
11. Press Reset Reservoir Filters.
If you are not replacing the entire set of filters, you can reset
the count for an individual filter.