2-4 Configure Printing
• Fine Text — prints at half the normal head speed to
improve the output quality of fine text and line art by elim-
inating overspray.
Caution Printing in Fine Text mode, which prints at 50% of
the speed of the "normal" Production and High
Quality modes, may expose the media to excessive
heat from the UV lamps, which could result in bow-
ing of the center of the media, and possible contact
with the printheads. Thinner rigid media such as
fluted polypropylene (Coroplast) are susceptible. To
avoid warping, set a media delay in Printer Set-
tings > Printing Delay, or in a custom Media Wiz-
ard parameter set for Fine Text printing.
This could also be an issue with Sharp Edge print-
ing, although this mode prints at 80% speed, so it is
less susceptible to excessive heat buildup.
4. Press an option to select it.
The UV lamps settings appear.
Fig. 2-2. Select Lamp Mode screen
