HTML Configuration Forms Will Not Display
135
• If you look at the back of the printer, is the STAT LED flashing
once a second, or is it quicker than that? A slower, once-a-
second rate indicates that the print server is in fact configured
with an IP address. A faster rate means it knows nothing about
this, so you may need to try the configuration process again.
• Have you confirmed that the network connection to the
Ethernet Interface is working correctly? Trying different network
cables and locations will help narrow down the problem.
• For wireless NIC, is the SSID correct? Is the operation mode
correct?
HTML Configuration Forms Will Not Display
• Can you ping the Ethernet Interface from the Windows
station? If not, refer to “Ethernet Interface Cannot Be Found On
The Network” on page 134.
• Have you used the correct URL for the Ethernet Interface home
page? It should be
http://EthernetInterfaceIPaddress
(e.g., http://192.75.11.9).
• Is HTTP support enabled? If not, refer to “Web Browser/HTTP
Problem” on page 139.
Errors Occur When Defining An LPR Printer
• Can you ping the Ethernet Interface from your Windows NT
station? If not, please refer to “Ethernet Interface Cannot Be
Found On The Network” on page 134.
• Did you specify the correct IP address or host name for the
Ethernet Interface in the first field of the “Add LPR Compatible
Printer” box?
• Did you specify a valid destination/queue on the Ethernet
Interface in the second field of the “Add LPR Compatible
Printer” dialogue box? If so, did you also enter it in lowercase
letters?
