Supported Servers and Operating Systems
The IBM Ultrium Internal Tape Drive Models T200 and T200F and the IBM 3580
Ultrium Tape Drive are supported by a wide variety of servers and operating
systems, as well as adapters. These attachments can change throughout the
products’ life cycles. To determine the latest supported attachments:
v For the Ultrium Tape Drive Models T200 and T200F, visit the Web at
http://www.ibm.com/storage/storagesmart/lto
v For the 3580 Ultrium Tape Drive, visit the Web at
http://www.ibm.com/storage/lto
Attachments to the drives include (but are not limited to) the servers and operating
systems in the following sections.
SCSI Attachment
The Ultrium Tape Drive Model T200 and the 3580 Ultrium Tape Drive use a SCSI
interface and attach to the following servers. For specific instructions about
attachment, see the IBM Ultrium Device Drivers Installation and User’s Guide.
Server Operating System
IBM AS/400
®
or IBM eserver iSeries
™
IBM OS/400
®
Level V4R4 or later
IBM RS/6000
®
, IBM RS/6000 SP
™
,orIBM
eserver pSeries
™
IBM AIX
®
4.3.3 or 5.1
Hewlett-Packard HP-UX 11.0 PCI 64-bit or HP-UX 11i
SUN
®
Solaris Version 2.6, 7, or 8
Intel-compatible servers Microsoft
®
Windows
®
2000 Level 2195 or
later, or Windows NT
®
Server Version 4 with
Service Pack 6 or later
Red Hat
®
Linux
®
7.1 kernel 2.4.2-2
Fibre Channel Attachment
The Ultrium Tape Drive Model T200F uses a Fibre Channel interface and attaches
to the following servers. For specific instructions about attachment, see the IBM
Ultrium Device Drivers Installation and User’s Guide. For more information, visit the
Web at
http://www.storage.ibm.com/hardsoft/products/sangateway/supserver.htm.
Server Operating System
IBM AS/400 or IBM eserver iSeries IBM OS/400 Level V5R1 or later
IBM RS/6000, IBM RS/6000 SP, or IBM
eserver pSeries
IBM AIX 4.3.3 with APARs IY10452 and
IY15766, or AIX 5.1
Hewlett-Packard HP-UX 11.0
SUN Solaris Version 2.6, 7, or 8
Intel-compatible servers Microsoft Windows 2000 Level 2195 or later,
or Windows NT Server Version 4 with
Service Pack 6a or later
Supported SAN Components
IBM 2103 Fibre Channel hub (distance solution, only one target per hub
IBM 2109 Fibre Channel switches
Chapter 1. Introduction 3
|
|
|
|
|
|
||
||
|
|
|
||
||
||
|
|
|
|
|
|
|
|
|
|
|
||
||
|
|
|
|
||
||
||
|
|
|
|
|
|
