Enter the Audio Control mode
Press the [AUD] button for at least 1 second.
Select the Audio item for adjustment
Press the [FM+] or [AM–] button.
Each time the button is pressed, the items that
can be adjusted switch as shown below.
You can control this item when 'Subwoofer Output'
(page 10) is set to "SubW On".
Volume offset: Each source’s volume can be set as a
difference from the basic volume.
- Refer to the catalog or instruction manual for
power amplifiers that can be controlled from this
- For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
When an amplifier that can only be set to +12 is
connected to the unit, "AmpB +18" won't work
correctly even if it's selected.
Exit the Audio Control mode
Turning the Subwoofer output ON or OFF.
Press the [AM–] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it’s ON, "SubW On" is displayed.
You can control this function when 'Switching preout'
(page 24) is set to "SWPRE SW".
You can play back adding gorgeous heavy bass to
the sound and making a 3D sound field.
Enter the WOW Select mode
Each time the button is pressed, the SRS WOW
Select switch as shown below:
Moves the sound image up a notch and adjusts
bass and the sound field.
Moves the sound image up two notches and
adjusts bass and the sound field.
Changes to the value set in 'SRS WOW Control'.
Changes to the value set in 'SRS WOW Control'.
Returns to the normal sound without SRS WOW.
When operation stops for 3 seconds, the SRS WOW
WOW: TruBass, FOCUS and SRS 3D are all set to values
The audio system automatically mutes when a
Listening to the audio during a call
The "CALL" display disappears and the audio
The "CALL" display disappears and the audio
