Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
Receive/play the station/disc you want to
Refer to the 'Switching Display' (page 13) and select
either "DNPS" or "SNPS". No name can be attached to
the source if "DNPS" or "SNPS" cannot be selected for
Press the [NAME.S] button for at least 2
Move the cursor to the enter character
Select the character type
Each time the button is pressed the character
type switches as shown below.
Press the [FM+] or [AM–] button.
Characters can be entered by using a remote with a
Example: If "DANCE" is entered.
Repeat steps 3 through 5 and enter the name.
Press the [NAME.S] button.
When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
The title of station/CD can be changed by the same
operation used to name it.
Auxiliary Input Display Setting
Selecting the display when this device is switched
to Auxiliary input source.
Select Auxiliary input source
Select the "AUX" display.
Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2
Select the Auxiliary input display
Each time the button is pressed it switches
through the below displays.
Exit Auxiliary input display setting mode
Press the [NAME.S] button.
When operation stops for 10 seconds, the name
at that time is selected, and Auxiliary input display
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
If this unit is removed from the battery, the Auxiliary
Input name is returned to "AUX".
