Kenwood KDC-BT945U Manual

A SERVICE OF

next previous

52

|

KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U

Bluetooth Setup

Function of KDC-X994/ KDC-BT945U

KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory)

Function of KDC-X794/KDC-MP745U

Adding a Voice Dialing Command

Add a voice tag to the phone book for voice dialing.

You can register up to 35 voice tags.

1

Enter Bluetooth mode

Press the [PLAY MODE] button for at least 1

second.

✍ You can also select from “Settings” in Menu List

mode.

2

Enter Phone book name edit mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “BT Settings”

> “Voice Tag” > “PB Name

Edit”.

3

Search for the name to register

Select the name to register with reference to 4 in

<Calling a Number in the Phone Book> (page 26).

If a voice tag has already been registered for a

name,“*”isdisplayedbeforethename.

4

Select a mode

Turn the [VOL] knob.

Display Operation

“PB Name Regist” Register a voice tag.

“PB Name Check”* Play a voice tag.

“PB Name Delete”* Delete a voice tag.

“Return” Return to step 2.

* Displayedonlywhenanameforwhichavoicetaghas

been registered is selected.

Select “PB Name Regist” (Regist)

5

Register a voice tag (first)

“EnterVoice1”isdisplayed.

When a beep is heard, say a voice tag within 2

seconds.

6

Confirm the voice tag (second)

“Enter Voice 2” is displayed.

When a beep is heard, say the same voice tag as

that you said in step 6 within 2 seconds.

“Completed” is displayed.

7

End registration

Press the [VOL] knob.

Return to step 2. You can register another voice tag

continuously.

⁄

• Ifyourvoicecannotberecognized,amessageis

displayed. Pressing the [VOL] knob allows you to retry

voice input. (page 52)

Select “PB Name Check” (Play)

5

Press the [VOL] knob.

Play the registered voice and return to step 2.

Select “PB Name Delete” (Delete)

5

Delete a voice tag

Press the [VOL] knob.

6

Turn the [VOL] knob to select “YES”, and then

press the [VOL] knob.

Exit BT Settings mode

Press the [PLAY MODE] button for at least 1

second.

⁄

• Audiosoundisnotoutputduringvoicetagregistration.

Function of KDC-X794/KDC-MP745U

Setting a Voice Command for

Category

Add a voice tag to the phone number category

(type) for voice calling.

1

Enter Bluetooth mode

Press the [PLAY MODE] button for at least 1

second.

✍ You can also select from “Settings” in Menu List

mode.

2

Enter Phone Number type edit mode

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “BT Settings” > “Voice Tag” > “PN Type

Edit”.

3

Select the category (type) you wish to set

Turn the [VOL] knob and press it when the

desired item is displayed.

Select “General”, “Home”, “Office”, “Mobile”, or

“Other”

4

Select a mode

Turn the [VOL] knob.

Display Operation

“PN Type Regist” Register a voice tag.

“PN Type Check”* Play a voice tag.

“PN Type Delete”* Delete a voice tag.

“Return” Return to step 2.

* Displayedonlywhenanameforwhichavoicetaghas

been registered is selected.

5

Register the category (type) by performing

steps 5 to 7 in <Adding a Voice Dialing

Command> (page 52).