15
2. Checking and Canceling
Transmission Files
After you have pressed the {
{{
{Start}
}}
} key (after scanning originals), you can check
and edit the destination or settings of Memory Transmission. You can also can-
cel a transmission, change the settings of a transmission, print a stored file, print
a list of stored files, and resend a file which the machine failed to transmit.
This function is available for Memory Transmission, Confidential Transmission,
Transfer Request, Polling Reception, and Polling Transmission.
Note
❒ If there are no files being sent, received, or stored by Memory Transmission,
[Change/Stop TX File] does not appear on the display.
❒ You cannot check or edit a file being sent or received. Also a Confidential
Transmission file or stored file to be printed as a report cannot be checked or
edited.
Displaying Confirmation of Transmission
A
AA
A
Press [Change/Stop TX File].
B
BB
B
Select [Check/Change Settings].
C
CC
C
Select files to be changed or
checked.
Note
❒ If multiple destinations were
specified, only the destination
selected first appears.
❒ If multiple destinations were
specified, only the number of
unsent messages appears.
D
DD
D
Check a file, and then press [Exit].
E
EE
E
Press [Exit].
The standby display appears.
